To resolve the issue of the calendar frame getting stuck on the logo screen, please refer to the following information.
1. Phenomenon
If the calendar frame remains stuck on the logo screen for 5 minutes after powering on—as shown in the image below—please use the repair package provided below to resolve the issue.
2. Repair tools
A Windows computer
A USB cable
Software repair package can support a Mac computer
3. Repair package(including two different repair packages that can be used).You can try the software's repair package first.
Software repair package can be used(Click it to download)
4. Step-by-step instructions (text version)
(1)MAC computer:
1. Download the attachment and double-click it to extract the "Repair kit" folder (any location is fine).
2. Connect the frame to your Mac with the USB-C cable. Keep the frame connected to a power source so the logo displays.
3. Open the MAC/AppUpdate folder and double-click update.command.
If macOS says it cannot be opened because it is from an unidentified developer, right-click update. command, choose Open, then click Open again.
4. Wait until the window shows "DONE". The frame restarts by itself; the first start-up may stay on the logo screen for 1-3 minutes. Do not unplug the power during this time.
If double-clicking update. command shows a message such as "you do not have appropriate access privileges":
Open the Terminal app, type bash followed by a space, drag update. command into the Terminal window, then press Enter.
(2)Windows computer:
1. Download the attachment and extract it (any location is fine).
2. Connect your computer and the frame with the USB-C cable. Keep the frame connected to a power source so the logo displays.
3. Open the Windows/Appupdate folder and double-click update.bat.
If Windows shows "Windows protected your PC", click "More info", then "Run anyway".
4. Wait until the window shows "DONE". The frame restarts by itself; the first start-up may stay on the logo screen for 1-3 minutes. Do not unplug the power during this time.
5. How to find the USB port on the calendar
Except for the TM10 model, the USB ports on all other calendar frames are covered with a sticker during production. If you wish to use the port, you must remove the sticker.
The USB port is located near the nameplate at the bottom of the back of the calendar frame, as shown in the figure below.
6. A Special TM10 Repair Method
Since the TM10 is somewhat unique—with its USB port located inside the frame—you need to open the casing to access it.
The unique tool: A small screwdriver or prying tool (to open the casing).
A video: Video about how to open the TM10 cover
If the issue persists or you do not have the necessary tools, please provide us with the relevant information, and we will assist you in initiating the warranty process.
A picture of this logo issue.
The purchase invoice or screenshot.
Our contact way
Email:cs@dragontouch.com
Phone Support: (888) 811-1140(US)
Hours: Monday – Friday, 9:00 AM – 5:00 PM
Comments
0 comments
Please sign in to leave a comment.